3-Pin XLR Male to Dual 6.35mm Jack Audio Splitter Cable for 1/4 Inch Inputs Through this XLR revolving dual 6.35mm cable, the 6.35mm mono audio output interface of two different devices can be connected to the xlr input interface of the power amplifier, (not used at the same time) to avoid damage to the device interface caused by frequent plugging and unplugging . You can also connect the XLR male to the audio input interface of the mixer. The 6.35mm port can be connected to an electric guitar or microphone, and a wireless microphone receiver. The 6.35mm port can be connected to two electric guitars or microphones at the same time, which can be used at the same time. The XLR to 2x 6.35mm cable is perfect for connecting a microphone with a 1/4inch jack to a DV camcorder, camcorder, or other professional audio equipment with an XLR connector. Suitable for microphones, mixers, power amplifiers, sound cards, KTV, home theater and other environments. XLR plug adopts zinc alloy shell, gold-plated contact point, good contact performance. strong and sturdy The 6.35mm also adopts zinc alloy shell, gold-plated contact points, and the shell is sprayed with black paint. The wire is made of 22AWG oxygen-free copper conductor, with 128 copper wires braided + aluminum foil double-layer shielding, and the wire is made of soft PVC material The middle Y-shaped interface is connected by PCB circuit board, and the shell is one-time molding. The distance from the Y-shaped sub-interface to the 6.35MM interface is about 50CM. Colour:Black Material:PVC+Metal Size:3.3Feet/1Meters / 6.6Feet/2Meters Package Contents: 1 * Audio Converter Adapter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.