Feature:1. Real Time Measurement: The gloss meter can be measured in real time, that is, just putting on and measuring, no button operation is required2. QC Judgment Function: The gloss meter has a QC judgment function, which can realize rapid detection. With ambient temperature compensation function, the value is stable, allowing long period calibration3. USB Transmission: The gloss meter supports USB transmission, which can be operated online with a computer and complete the test report. With aluminum shell and stable base, compact and portable4. Rechargeable Battery: The gloss meter is a built in rechargeable lithium battery with low power consumption and can last for more than 48 hours on a single charge5. Scope of Application: Used for appearance gloss test of paint, coating, ink, plastic, paper, ceramic tile, ceramic, stone, metal and electroplating layerSpecification:Item Type: Gloss MeterMaterial: Aluminum AlloyModel: LS192Battery: 1 x Rechargeable Lithium Battery 3.7v 1000mAh (built in battery)Purpose: Sampling and Comparison of Gloss MeasurementScope of Application: Appearance Gloss Test of Paint, Coating, Ink, Plastic, Paper, Ceramic Tile, Ceramic, Stone, Metal and Electroplated LayerMeasuring Angle: 60Measuring Spot: Approx. 9 x 15mm / 0.4 x 0.6inMinimum Size of Test Object: Approx. 20 x 10mm / 0.8 x 0.4inMeasuring Range: 0-1000GUResolution: 0.1GURepeatability:0-100GU: 0.2GU100-1000GU: 0.2% of ReadingReproducibility:0-100GU: 0.5GU100-1000GU: 0.5% of ReadingZero Error: 0.1GUIndication Error:0-100GU: 1.5GU100-1000GU: 1.5% of ReadingWeight: Approx. 300g/10.6ozBattery Capacity: 1 x Rechargeable Lithium Battery 3.7v 1000mAhDisplay: 19264System Language: Simplified Chinese, EnglishCharging Interface: USB (type c)Data Interface: USBOperating Temperature Range: 10~45, 0~85%RH (non condensing)Storage Temperature Range: -10~60, 0~85%RH (non condensing)Ambient Temperature Compensation Function: SupportQC Judgment Function: SupportUSB Transfer: SupportComputer Connection: SupportThe Standard Board is Dirty, Please Wipe the Standard Board Clean with a Special Lens Cloth, and then Buckle the Host into the Base.The Host is Not Close to the Standard Board, Please Buckle It into the Base Again.When the Ambient Temperature Changes Significantly, the Instrument Temperature and the Ambient Temperature Should Be Close to Each Other, and After Confirming That the Lens in the Test Port of the Instrument and the Standard Plate of the Base Are Not Dew, Restart the Measurement.Light Source Attenuation Causes MalfunctionWhen the Instrument Prompts "Calibration Failed!", You Can Long Press the Button to Skip the Calibration.4. Measurement(1) Normal ModeIf the Instrument is Set to Normal Mode, After the Calibration of the Instrument is Completed, Remove the Base and Place the Measuring Port of the Instrument on the Appearance of the Object to Be Measured, and the Instrument Will Display the Measured Value at That Place in Real Time. Short Press the Button, the Lower Left Corner of the Interface Displays the "Hold" Pattern, and the Measurement Data is Kept on the LCD. if You Need to Measure Again, Press the Button to Cancel the "Hold" State and Return to the "Measuring" State.(2) QC ModeIf the Instrument is Set to QC Mode, After the Instrument is Calibrated, Remove the Base, Place the Measuring Port of the Instrument on the Appearance of the Object to Be Measured, and Short Press the Button to Perform the Measurement. After the Measurement, the Measured Value Will Be Judged Whether It is Qualified. the Range of the Upper and Lower Limits Must Be Set by PC Software. for Specific Operations, Please Refer to the "Gloss Meter Software Operation Manual".5. PC SoftwareConnect to a Computer Via USB, You Can Use the Gloss Meter PC Software. the Software Can Perform Functions Such As Online Measurement, Parameter Setting, Report Generation and Printing. for Specific Operations, Please Refer to "Gloss Meter Software Operation Manual"..Package List:1 x Gloss Meter1 x U Disk1 x Data Line1 x Cleaning Cloth1 x Calibration Report1 x User ManualNote:1. The Instrument Has Temperature Compensation and Allows Long Period Calibration. It is Recommended to Calibrate Once a Week. if the Ambient Temperature Changes Significantly, It Must Be Recalibrated.2. The Test Port of the Instrument Should Be Attached to the Appearance of the Object to Be Tested to Avoid Leakage of External Light.3. After the Base is Removed from the Host, It Should Be Stored in a Clean Place to Avoid Contamination of the Standard Board.4. Do Not Insert Any Objects into the Instrument to Clean It, As This Will Damage the Instrument, Affect Measurement Accuracy and Operational Safety.5. The Instrument and Standard Board Should Be Cleaned Before Storage and Use, and Use a Clean Special Lens Cloth to Remove Contaminants. the Appearance of the Standard Plate is Very Accurate, So Make Sure That the Lens Cloth Does Not Have Any Fine Particles, Otherwise It Will Damage the Standard