Selling Point Note 1: Use the vehicle fitment information provided in the listing to confirm compatibility. If you are unsure which item fits your vehicle, please with your VIN to confirm before purchasing. Note 2: No sensor programming required. The tire pressure sensor is and pre-programmed for your specific make, model, and year. Activation is required using a scan tool or re-learning process. Simplified relearn procedure: OBDII is required. TPMS installation is recommended to be performed by trained professionals. SPECIFICATIONS: Replacement for Part Numbers: 40700-4CB1B, 407004CB0A, 407004CB1A Battery Life: Approximately 3 years Operating Frequency: 433MHz PACKAGE CONTENTS: Standard package VEHICLE COVERAGE: FOR Alpine A110 (from 2017-12 to 2022-06) FOR Lada Granta (from 2014-03 to 2021-08) FOR Lada Kalina (from 2013-07 to 2019-10) FOR Nissan Leaf (from 2017-12 to 2021-12) FOR Nissan Micra (from 2017-02 to 2023-02) FOR Nissan NV200 (from 2009-09 to 2020-09) FOR Nissan Qashqai (from 2016-10 to 2020-09) FOR Nissan X-Trail (from 2016-10 to 2020-04) FOR Renault Espace V (from 2015-01 to 2021-03) FOR Renault Kadjar (from 2015-04 to 2019-06) FOR Renault Kangoo ZE (from 2017-01 to 2019-12) FOR Renault Koleos (from 2016-08 to 2022-03) FOR Renault Megane (from 2016-09 to 2024-05) FOR Renault Megane Van (from 2016-02 to 2023-06) FOR Renault Scenic (from 2016-09 to 2023-06) FOR Renault Talisman (from 2015-09 to 2022-09) INSTALLATION PROCEDURE: 1. Loosen the tire: Remove the valve cap and core, then deflate the tire. 2. Dismount the tire: Mount the tire onto a tire changer, positioning the valve at 1 o'clock relative to the tire separation head. Use a tire tool to lift the bead onto the mounting head. 3. Remove the sensor: Use a screwdriver to remove the fastening screw and sensor from the valve stem, then loosen the nut and remove the valve. 4. Install sensor and valve: Insert the valve stem through the rim's valve hole. Secure the nut with 4.0 Nm torque using a positioning pin. Attach the sensor body to the rim and tighten the screw. 5. Mount the tire: Position the tire on the rim with the valve at a 180-degree angle from the separation head. Mount the tire onto the rim properly.