Original Mebay ATS320AC Generator ATS Controller Panel Automatic Transfer Switch Control Module With USB Port Generator Parts The controller is a mains/gens ATS controller, which can automatically or manually control the ATS dual power switch, suitable for the application of one mains and one power generation. The LCD screen can display various faults at the same time. Once the generator does not run normally, it can effectively achieve protection. It can display single-phase power generation voltage, power generation frequency, mains voltage, and mains frequency; the working mode (manual, automatic, test, shutdown) indicates the working status of the ATS switch through the LED indicator; There are Chinese/English interface options, more language can be set according to user's request. All the parameters can be configured through the front face buttons or use programmable interface by USB to adjust via PC. It has compact structure, advanced circuits, simple wiring and high reliability, It can be widely used in various types of power systems PARAMETERSDISPLAY Mains voltage Work Mode Mains Frequency Total Running Time Gens Voltage Total Workingtime Real-time status Gens Frequency Switch Status PARAMETERS Working voltage: AC 90V-450V(L1N1/L2N2) Power Consumption: - Standby: MAX 1W - Working: MAX 2W Gens Voltage Input: 1P2W 90VAC-450VAC (ph-N) Mains Voltage Input: 1P2W 90VAC-450VAC (ph-N) MAX Accumulating Time: 99999.9Hours (Min Store time: 6min) Closing gens output: 250V/5 AMP Non-contact normally Open output Closing mains output: 250V/5 AMP Non-contact normally Open output Remote start output: 250V/3 AMP Non-contact normally Close output Closing Gens input: Engagement brake feedback signal valid Closing Mains Input: Engagement brake feedback signal valid Working Condition: -25~70 Storage Condition: -40~80 Protection Level: IP65:when waterproof rubber gasket is added between controller and its panel Overall Dimension: 106mm*86mm*45mm Panel Cutout: 78mm*66mm Weight: 0.5kg MAN FEATURES - 32bit high performance single chip microcomputer. - LCD screen, Available in Chinese/English languages, users language set if necessary. - Collection and display, gen, mains, phase and other parameters. - Automatic/Manual mode. In manual mode, can force the switch to close or open. - Suitable for various AC systems (3 phase 4-wires, single-phase 2-wire, and 2-phase 3-wire). - Input/output function, status can be shown directly. - Totally 3 relays output. - Totally 2 configurable switch input. - USB Port: parameters can be set even without power through USB port to monitor in real time. - Control Protection: Realize automatic ATS switching of generator sets, perfect fault display and protection functions. - Standard water-proof rubber gasket. The waterproof can reach IP65. - Module design: All the connections are adapted with European connectors so that installation, connection, repair and replacement can be more easily.