LCD Screen with Digitizer Full Assembly Before Installation Notes Tip 1: Test before installation When testing, do not remove any protective film or tags. Be aware of static electricity. Before attempting any repair, ground yourself using an ESD (electrostatic discharge) strap to prevent static damage to internal electronic components. Wear eye protection and handle with care to avoid injury from glass shards. Tip 2: Simulated testing Screen replacement is a fragile component. We strongly recommend testing before full installation. Perform simulated testing by connecting the motherboard and LCD/screen assembly with the audio cable, powering on the device, and verifying functionality. If the test is successful, proceed with installation. If the display does not function, immediately. Do not force installation. We are not responsible for units after installation. Tip 3: Avoid over-bending the cable Ensure the LCD cable is not bent beyond 90 degrees, as excessive bending may result in a black screen. About the product 1. Replacement assembly including LCD display and touch screen digitizer 2. Replace damaged or nonfunctional components with a new unit 3. Restore your device’s appearance and functionality 4. Designed for precise fit and full compatibility 5. Each unit is inspected and verified to be in good condition prior to shipment 6. Professional installation is highly recommended. We are not responsible for units after installation.