Electric heating thermostat with integrated probe, measuring room temperature with an accuracy of 0.1C, flush-mounted installation, suitable for European 86 flush-mounted boxes, CE approved. Adjustable temperature range 5-95C, maximum output current 16A The electric floor heating thermostat uses 2 sensors by default. External sensors measure the floor temperature and can stop heating when the floor temperature exceeds the set temperature, adding an extra layer of safety. The room thermostat can operate in control mode manual or in programmed operating mode depending on the application. The room thermostat has a weekly programming function that allows you to automatically switch to the desired temperature at the set time, with 6 fixed periods on weekdays and 2 days off, while weekdays can be freely selected as 5, 6 or 7 days. You can set the time and the corresponding temperature at any time. Room thermostat with temperature calibration function for accurate calibration of 0.1C when the measured temperature differs significantly from the actual room temperature. The digital thermostat with LCD display indicates the heating status and allows easy access to the current thermostat status. Room thermostat with backlight white which lights up when the thermostat is actuated and turns off automatically when not actuated, making it easier to adjust the thermostat in dark environments. The room thermostat is equipped with a memory function in in the event of a power outage, so that the information can be saved even in the event of a power outage after adjusting the parameters. Room thermostat with lockable keys to prevent children from accidentally touching it< /p> The room thermostat has a start differential function, which can be adjusted between 0.5 and 10C. For example, if the set temperature is 20C and the flow temperature difference is 1C, the thermostat will turn off the heating when the room temperature is 21C or more and turn on the heating when the room temperature will be 19C or less.