Electric Bait Swimming Robotic Segment Fishing Lure USB Charging Swim Bait

١٥٫٩٥٠ د.ب.‏
والشحن مجاناً

Electric Bait Swimming Robotic Segment Fishing Lure USB Charging Swim Bait

  • العلامة التجارية: Unbranded

Electric Bait Swimming Robotic Segment Fishing Lure USB Charging Swim Bait

  • العلامة التجارية: Unbranded
سعر البيع القطاعي المقترح: ٣٣٫٩٥٠ د.ب.‏
السعر: ١٥٫٩٥٠ د.ب.‏
أنت توفر: ١٨٫٠٠٠ د.ب.‏ (53%)
البائع:
١٥٫٩٥٠ د.ب.‏
والشحن مجاناً

في المخزون

نقبل وسائل الدفع الآتية

الوصف

Durable: these metal hold down brackets are made of reliable metal materials, strong, durable and , easy to install and less likely to deform or break; They are suitable for most blinds or windows and can you for a long time Appropriate size: It is suitable for most blinds and does not take up too much space; Before ordering, please check the size carefully and make sure they can match your windows or blinds Simple design: blind hold down brackets are simple in design, small in size, thus, they are difficult to be noticed; Using them to hold down most blinds will not affect the overall appearance of the blinds, and you can enjoy the beautiful scenery from the windows as well Easy to apply: the installation and application of these tools are rather easy and convenient; , you put the pins into the holes of the brackets, and then reinforce them and you can successfully apply them; For more details, please refer to the installation steps Proper ans simple appearance: These metal hold down brackets are simple in design, small in size, thus, they are difficult to be noticed. Using them to hold down most blinds will not affect the overall appearance of the blinds, and you can enjoy the beautiful scenery from the windows as well. Installation procedures: 1. What you need: drill, screwdriver, tape measure, hammer, pencil. 2. If the bottom rail is not fitted with pins, drill a . 1/2 inch deep 7/64 inch or 3/32 inch bit in the center to hold pins on both sides of the rail. 3. Punch the pins in. 4. Put the blind plate down, put the bottom rail flat in place, and mark the position of the fixed bracket with a pencil. 5. Screw the bracket to the door. 6. Measure the position of the bracket now screwed to the door and mark on the other side. 7. Then repeat the above steps to installthe second bracket. colour: silver Material: metal Size: About 42x32.2mm Package Contents: 4 x Hold down brackets With screws 4 x Pin bolts Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • هوية Fruugo: 388912550-834027832
  • EAN: 680141766609

معلومات سلامة المنتج

يرجى الاطلاع على معلومات سلامة المنتج الخاصة بهذا المنتج الموضحة أدناه

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

ملصقات سلامة المنتج

CE Mark

التسليم والرد

يُرسل خلال ٢ أيام

  • STANDARD: مجاناً - التسليم بين الجمعة 07 نوفمبر 2025 – الاثنين 17 نوفمبر 2025 - مجاناً

يُشحن من الصين.

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل. عرض سياسة الرد الكاملة