Specifications Material: Stainless Steel Size: rod length: 13.5cm, rod height: 10.5cm, Dimensions of the plate: 9.0cm * 4.5cm Package Includes: - 1 x toilet paper holder installation steps 1 Clean the wall. The wall should be dry, free of dust, grease and wax. 2 Mark the desired location for the product on the wall before mounting. 3 Remove the protective foils of adhesive Tape 4 Paste the product to the marked area and press it for approx. 5-8 seconds. Do not move the product after installation. 5 Wait at least 24 hours before use. Removal steps 1 Heat with a hair dryer for 3-5 minutes 2 Then scrape it off with a knife Note Self-adhesive toilet paper holders can only be used on smooth surfaces such as glass, wood, tiles, mirrors, baking surfaces, smooth metal surfaces, etc. Not applicable to painted walls, calcareous walls, wallpaper or other soft or uneven surfaces.