Feature:1. When the protected circuit enters an unsafe value, the builtin protector automatically cuts off the circuit, and resumes normal operation when the value returns to the normal range, which is automatic protection functions such as overcurrent, overvoltage, overheating, short circuit, etc.2. Allround protection because designed with potting and waterproof technology, more stable and reliable3. Organic silica gel potting has waterproof, dustproof and shockproof effects, and suitable for use in various harsh environments4. Used for LED car display, surveillance camera, electric fan, water pump, motor, photovoltaic energy numerical control equipment, water pump, router, ADSL modems, switches5. Widely used for LED lights, digital photo frames, electronic refrigerators, portable DVDs, stereos, security systems, portable tools, printers, network equipment, various industrial electrical equipment with corresponding voltages, etc.Specification:Item Type: Buck ConverterMaterial: Organic silica gel + aluminumModel: GYVRM-JD1L480530Input Voltage Range: 36V/48V (DC30-60V)Output Voltage: 5VRated Output Current: 30AOutput Power: 150WProtection Level: IP67Conversion Efficiency: Up to 96%Working Temperature: -20~+80Installation Line Length: Approx. 13cm / 5.1in.Package List:1 x Buck Converter1 x Wiring DrawingNote:1. In order to ensure the normal operation of the converter within the input voltage range, the input voltage must not be lower than the minimum or maximum input value restricted by the product during use, and the input voltage value must be higher than the output voltage value by more than 2V. If there is no voltage difference of 2v, the output value will be lower, but it will not damage (affect) the use of the converter.2. The input current must be greater than or equal to the required power of the output load device (for example, if the power of the load device needs 100w, then the input power must be greater than or equal to 100w). When the converter is in use, the current of the load device should not be greater than the maximum current value that the converter can withstand, and leave as much margin as possible for the converter to ensure that the converter works normally and achieves the highest conversion efficiency.3. The positive and negative poles of the converter cannot be reversely connected during use. Reverse connection may cause damage to the converter. It is recommended to add a suitable fuse to the input terminal during use.4. When there is no load, the chip works in light load mode, and the output voltage may vary within a certain range.