This switch is the perfect solution for setting turn signals on early street pole projects.Simply clamp the steering column without drilling or cuttingDie casting and chrome plating.It is a 7-wire design that includes a wiring .These apply to many early street poles.Installation Notes:1. Insert the clip into the narrow space between the signal switch housing and the strap support.2. Wrap the clamp around the position on the steering column.3. the ends of the clip and tighten the screws until the switch is securely .4. Scratch a small piece of paint from the steering column to a good grounding The clamp is in a position that allows metal contact.Switch type: turn signal switchEquipment: Universal for , , and other vehiclesExchange part number: P111-HL101-2PINVoltage: 12V replacement: HL101Cable length: 60cm / 23.4 inchesFor Universal , , and other vehicles.Colour: silverMaterial: metal + plasticPackage Contents:1 * Turn Signal SwitchOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.