OEM LCD Screen for Microsoft Surface 3 1645 RT3 1645 10.8 with Digitizer Full Assembly About the product 1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Microsoft Surface 3 1645 RT3 1645 10.8 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself with an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulate testing Screen replacement is a very fragile product. We strongly suggest testing before installation. Please simulate testing, which means opening the device, connecting the motherboard + LCD or screen, attaching the audio cable and new replacement, then powering on to test. If the test is successful, please proceed with installation. If it does not display properly, please immediately. Do not force installation if the screen does not function properly. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable is not over-bent. Bending over 90 degrees will cause black display.