A. LARGE RESIN MOLDS: To fill the entire resin mold, you may need about 1200 g of resin. If you plan to make a large pyramid, using mold release is suggested and dividing your casting process into several times is advisable. B. ORGONE PYRAMID MOLDS: This large pyramid mold has measurements on the outside. You can make orgone pyramids of various sizes smaller than 15cm, such as 4cm, 6cm, 10cm, etc. C. DURABLE SILICONE MATERIAL: The large resin molds are made of durable silicone material, which is quite flexible and easy to demold. The finished projects have a relatively high - transparency appearance. D. NOTE: Be careful when placing the silicone mold insert into the plastic frame accurately, ensuring all sides are flush. The silicone molds are for craft use and not suitable for food. E. Note: How to clean: Clean the silicone molds and use a soft cloth to wipe them clean. How to store: Store the resin molds away from direct sunlight and dust. How to release: It is recommended to use "mold release". If you don't have it, you can use a drop of soap mixed with a bit of water as a release agent. Apply it to the mold and then push the project from the bottom. Also, make sure your resin pyramid is fully cured. F. A hard plastic box stand is included. It stands firmly on a flat surface to help ensure a well - shaped orgone pyramid. The internal silicone mold fits well inside the stand. Without the stand, it might be difficult to make a perfect pyramid as the internal silicone mold could tilt to one side when adding resins and crystals. G. Scales are engraved on the box stand so that you can make pyramids of the size you prefer. H. Pyramid Mold Size: height: 15cm/5.9inch; base: 15cm/5.9inch x 15cm/5.9inch; colour: transparent white. I. Material: Silicone + plastic. J. Package Contents: 2 * Silicone Pyramid Molds, 1 * Plastic Frame. Only the above package content is included, other products are not. K. Note: Light and different displays may cause the color of the item in the picture to differ slightly from the real thing. The measurement error is about +/- 1 - 3cm.