This USB-C to Dual XLR o cable converts smart devices with USB-C interfaces, such as smartphones, notebooks, and tablets, into dual XLR outputs. The red connector indicates the right channel output, and the black connector indicates the left channel output. The output end connects to the XLR input ports of power amplifiers, active speakers, and stage o systems. Please note that this is a one-way conversion cable: the USB-C port outputs o signals to XLR, and the XLR ports are not compatible with microphones. The cable features a Y-shaped branch design, with the split located approximately 50 cm from the XLR plugs. It is equipped with a 32-bit/384 kHz DAC chip, offering higher sampling rates, improved o clarity, stronger driving capability, and a higher signal-to-noise ratio compared to standard 16-bit or 24-bit chips. Specifications: - DAC: 32-bit, 384 kHz - Dynamic Range (DNR) @1kHz, -60dBFS: Typical 100 dB - THD+N @1kHz: -85 dB - Output Voltage: 500 mVrms (Typical) - Crosstalk @1kHz, 0dBFS: -80 dB - Dormant Current: 1.5–2 mA - Standby Current: 25–35 mA - Working Current: 40–50 mA - Output Impedance: 8–32 Ω - Output Level: 530–630 mV - Frequency Range: 20 Hz – 20 kHz - THD+N: -90 to -80 dB - SNR: 95–105 dB - DNR: 95–105 dB - Crosstalk: -90 to -70 dB Color: Black & Red Material: Plastic Length Options: 1 meter, 2 meters, 3 meters Package Includes: 1 x o Cable Note: The product image may slightly differ in color due to lighting and display variations. Measurement tolerance is ±1–3 cm.