For BMW NAV Garmin Zumo XT XT2 locking GPS Installation Adapter Motorcycle Accessories For Garmin Zumo XT or XT2 Locking Adapter for BMW NAV GPS Mount "The adapter that makes it work" If you are upgrading your Garmin NAV V/VI to a Garmin Zumo XT or Zumo XT2 GPS this locking adapter will solve your problem and allow you to mount and lock the Zumo XT/XT2 in the same place as For your BMW Garmin NAV V/VI. You need to have a For BMW NAV base as shown in the pictures and have a Garmin Zumo XT or XT2 to use this adapter. This adapter will only work for that configuration and used with the Zumo XT or XT2 Nav base that is included with the purchase of the Zumo XT or XT2 For The BMW Adapter works with BMW 1200 GS/GSA and the 1250 GS/GSA. For The BMW adapter makes it possible to mount the Zumo XT or XT2 in the BMW factory NAV Base and lock the Zumo XT/XT2 securely in place. The adapter allows the Zumo XT or XT2 to be installed in the factory NAV base restoring the factory lock and retaining the factory appearance, preventing the need for aftermarket mounts on your handle bars. The adapter kit includes the matching plug for the factory wiring harness, which is located in the right frame area. You will need to connect the supplied plug to the Zumo XT or XT2 harness utilizing the supplied crimp connectors. Once complete, the entire assembly can be connected to the vehicle ensuring voltage supply to the unit for charging and ignition control. When complete, the Zumo XT/XT2 only sticks out an additional inch towards the rider allowing full view of the instrument cluster.