Laboratory power supply POWER SPS-C3010 with adjustable output voltage in the range of 0-30V and current up to 10A. The device is indispensable in every workshop, it will be perfect for electronic service and home workshop. Highlights: Clear display Smooth voltage and current regulation CV working mode constant voltage output Working mode CC constant current output Solid construction of high-quality materials Simultaneous reading of voltage and flowing current at the output Security system Voltage/Current/Power Display The button on / off the output voltage without having to turn off the entire power supply !!! Specification: Supply voltage: 200-240V AC / 50-60Hz Output voltage range: 0-30V Output current range: 0-10A Voltage display accuracy: 10mV Current display accuracy: 1mA Active fan cooling Protections: overvoltage, overload, temperature The ability to set parameters before applying voltage to the output The button on/off the output voltage without having to turn off the entire power supply !!! Construction of the device voltage display Current display Power display USB socket max 2A Mains power switch "" connector GND connector Connector "- Output voltage switch Accurate current regulation Coarse current regulation Accurate voltage regulation Coarse voltage adjustment Voltage Regulation: Output voltage adjustment: 0 - 30V Control accuracy: 0.1%3mV Ripple and Noise: 30mVrms Current regulation: Output current adjustment: 0-10A Control accuracy: 0.2%3mA Ripple and Noise: 20mArms POWER power supplies are equipped with a very useful, and sometimes necessary, function that allows you to turn off the output voltage without having to turn off the entire power supply. This allows for precise parameter setting without disconnecting the power cables from the device. This solution eliminates the risk of damage to the device as a result of accidentally applying too high voltage right after connecting the power supply to the mains, before it is even possible to regulate it. In POWER power supplies, after switching on the power supply, no voltage appears at the output, you can safely check the current and voltage settings and only then turn on the power supply at the output. Included: SPS3010 power supply AC power cord A set of wires User manual EN Device dimensions: Height: 155 mm Width: 85 mm Depth: 240 mm Cable length: 100 cm Weight: 1.2Kg Power supply test using the FLUKE 8808A meter.