Feature:1. Carefully manufactured, perfectly suitable for Jeep F150 Wrangler Rubicon JK CJ TJ YJ.2. It is made of highquality PVC material, has super adhesion, does not fade for a long time.3. Has excellent waterproof effect, no worry about wind and rain, very practical function.4. Exquisite patterns, carefully designed by experts, perfectly match your car, make your car more stylish and unique.5. The installation is simple, without any complicated tools, just tear off the back to paste, the operation is simple, convenient and fast.Specification:Item Type: Car Body StickerMaterial: PVCDiameter: Approx. 50cm/19.7inColour: BlackFitment: For Jeep F150 Wrangler Rubicon JK CJ TJ YJInstallation Method:Installation method of small car sticker with transparent transfer film (dry sticker method):1. Clean the body and keep it dry.2. Determine where you need to post. Under normal circumstances, slowly stick it on one side, scrape it flat with a tool, while peel off the bottom paper.3. If the graphics are not large, you can also tear off all the transparent transfer film and stickers before attaching them. But you must be careful not to accidentally stick.4. After it is pasted, scrape and press it again and again. Tear off the transparent transfer film.5. Make a cut with a utility knife on the car door and the gap, and then paste it well6. Don't let the car sticker and the body have any separation or protrusion.Installation method of large car sticker with transparent transfer film (wet sticker method):Tools: Rag, sprinkler, scraper or credit card1. Clean the body, and evenly spray water on the body part to be pasted-to reduce the viscosity of the sticker and facilitate the adjustment of the position.2. Determine where to post. Slowly stick it, gently scrape it with a tool, while peel off the bottom paper.3. When encountering door handles or anti-scratch strips, cut open the materials and pack them in according to the situation.4. Make proper adjustments. After confirming the approximate position of the graphics, wipe off the water and air bubbles repeatedly. Tear off the transparent transfer film.5. Make a cut with a utility knife on the car door and gap, and then paste it well.6. Don't let the car sticker and the body have any separation or protrusion.7. Try to let the moisture in the car sticker dry, and if possible, it can be heated and dried appropriately. According to the weather, wash the car after one or two days.In order to reduce the installation difficulty for customers, the car stickers we provide have been covered with transfer film in advance. (Except for the whole block of continuous graphics).Package List:1 x Car Body StickerNote:1. Do not wax one week before deciding to dress up your car. Wax will make the sticker not stick firmly; do not wash the car within three days after the car sticker is pasted.2. If the sticker needs to be pasted on the door seam or other places that need to be moved, don't worry, just cut it off with a sharp knife after it is pasted.3. If you really don't want to do it, please go to the local place where can paste the solar film to ask for help.