Manual High Pressure Air Pump Portable Inflator with Pressure Gauge for Oxygen Cylinder Diving

٥٤٫٠٠٠ د.ب.‏
والشحن مجاناً

Manual High Pressure Air Pump Portable Inflator with Pressure Gauge for Oxygen Cylinder Diving

  • العلامة التجارية: Unbranded

Manual High Pressure Air Pump Portable Inflator with Pressure Gauge for Oxygen Cylinder Diving

  • العلامة التجارية: Unbranded
سعر البيع القطاعي المقترح: ٧٤٫٠٠٠ د.ب.‏
السعر: ٥٤٫٠٠٠ د.ب.‏
أنت توفر: ٢٠٫٠٠٠ د.ب.‏ (27%)
البائع:
٥٤٫٠٠٠ د.ب.‏
والشحن مجاناً

في المخزون

نقبل وسائل الدفع الآتية

الوصف

Features:Made of high quality stainless steel, anti-rust and durable. High pressure air pump by hand, 53cm/20.9in length air pump tube. Simple to operate, making diving become easy, no need to carry large scuba.With a pressure gauge on it, you can know when to stop inflating. Portable and practical, essential accessory for diving. Specification:Material: Stainless SteelColor: Shown as picturesAir Tube Length: Approx. 53cm / 20.9inConnector Diameter: 3.1cm / 1.2inConnector Length: 9cm / 3.5inWeight: Approx. 2840gPackage List:1 * High Pressure Air Pump (with Connector and Air Tube)1 * Wrench(Size: 14.8 * 5 * 0.25cm / 5.8 * 2.0 * 0.1in)2 * Packages of Accessories1 * ManualNote:1. High-pressure air pump, in the process of air inflating due to up and down friction, resulting in fever, this phenomenon is normal.2. The phenomenon of oxygen cylinder respirator can't be inflated: firstly, when oxygen cylinder respirator is delivered, it does not contain gas, secondly, check the high-pressure pump before inflating the high-pressure pump, assemble it according to the instructions, install the gasket rubber ring, tighten the exhaust valve, and then inflate it. This product is different from oxygen pumps such as basketball, volleyball. Effectively, please be patient to inflating for two or three minutes before the pressure gauge will change. It takes three men to inflating about 16 minutes for each oxygen cylinder to fill up. Within 3000PSI, it is within the normal range. Over 3000PSI may burst (please don't inflating too full).3. Oxygen cylinder head and body should be checked for tightness, good connection and not standing above the oxygen cylinder when inflating. Be careful not to inflate the oxygen cylinder to a certain pressure. Oxygen has certain impact. Please pay attention to safety.4. When the pumpis finished, please notice that it is dangerous to twist the exhaust valve of the high-pressure pump and suddenly pull out the connecting port between the pump and the oxygen cylinder.5. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering..
  • هوية Fruugo: 416656014-879131033
  • EAN: 7540131903014

معلومات سلامة المنتج

يرجى الاطلاع على معلومات سلامة المنتج الخاصة بهذا المنتج الموضحة أدناه

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

ملصقات سلامة المنتج

CE Mark
تحذيرات السلامة: Warning: Please read the product instructions carefully before use to ensure correct use.
رقم سري: 7540131903014

التسليم والرد

يُرسل خلال ٢ أيام

  • STANDARD: مجاناً - التسليم بين الاثنين 10 نوفمبر 2025 – الاثنين 17 نوفمبر 2025 - مجاناً

يُشحن من الصين.

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل. عرض سياسة الرد الكاملة

تفاصيل امتثال المنت

يرجى الاطلاع على معلومات الامتثال الخاصة بهذا المنتج الموضحة أدناه.

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

الجهة المصنعة:
توضح المعلومات التالية تفاصيل الاتصال الخاصة بالجهة المصنعة للمنتج ذي الصلة والذي يُباع على Fruugo.

  • Wuhan Pinsheng Technology Co., Ltd.
  • Wuhan Pinsheng Technology Co., Ltd.
  • No.A357,Shoulder-to-shoulder?Incubator,Building?4
  • Wuchang District
  • Wuhan
  • CN
  • 430000
  • pinsenkj@163.com
  • 18062524796
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

الشخص المسؤول في الاتحاد الأوروبي:
توضح المعلومات التالية معلومات الاتصال الخاصة بالشخص المسؤول في الاتحاد الأوروبي. الشخص المسؤول هو المُشغل الاقتصادي المُعيّن والكائن في الاتحاد الأوروبي والمسؤول عن التزامات الامتثال المتعلقة بالمنتج ذي الصلة الذي يُباع داخل الاتحاد الأوروبي.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795