WindTravel Outdoor: Material: 1mm titanium plate, the chimney is 0.1mm titanium foil, other accessories are 304 stainless steel Product size: 31.2*19.6*24.6CM Pipe length: 2m/2.5m/3m Net weight: 1.95kg Glass thickness: 4mm Packing box includes: 1* mini titanium furnace, 1* titanium chimney, 1* chimney regulator, 1* spark guard, 1* wood hook, 2* gloves, 1* tote bag Product features: (1) Easy to carry, easy to fold, very suitable for camping (2) Made of titanium alloy, titanium alloy furnace heat transfer fast, not easy to deformation. (3) The front selection of high-temperature glass, can adapt to the high temperature of more than 1000 degrees, can better observe the firewood situation in the furnace, the side can also choose glass, can be heated, observe the firewood situation, and can be used for lighting. (4)You can fold the stove into a bag and travel in a backpack. (5) The front of the furnace body is provided with an air intake valve, which is easy to control the flame size, and the side is provided with a secondary combustion regulating valve, which can make the wood fully burn, form air reflux, and it is not easy to observe the glass black. (6) The top of the furnace is provided with a rotary regulator to control smoke exhaust, and the top of the chimney is provided with a spark protection device The tent stove is not only used for heating, but also for cooking, boiling water and so on. The 0.1mm titanium alloy plate can be easily and directly unfolded to form a chimney Winter camping, hunting, fishing in the wild will never be cold again, you can comfortably spend a cold night. Safety Notice: 1. Keep the stove away from flammable objects to avoid igniting objects or tents 2. If you use a wood stove in the tent, please maintain good ventilation to prevent poisoning 3. Do not wipe the glass with wet towel or water on the glass during use, otherwise it will cause the glass to break 4. When installing and using the stove, please wear gloves to prevent cuts or burns. Product Details: The top of the glass is designed with an air regulating valve, the air entering from the top forms a secondary combustion, while the glass surface forms a downward air curtain, and the glass is not easy to become black in use. The bottom sides of the furnace body are designed as protruding parts, which can be placed directly on the table without opening the furnace leg, so that the furnace bottom plate does not directly contact the table top. The chimney base can be quickly fixed by three screws, and the control valve through the base can adjust the amount of gas output, so as to adjust the size of the flame inside the furnace and control the temperature in the furnace. Two reinforcing bars are designed at the bottom of the furnace body, and the bottom plate is more difficult to deform in the heat. The air conditioning valve is designed under the glass on the front of the furnace to adjust the size of the flame in the furnace body by adjusting the amount of air, so that the wood can be fully burned. The wood rack is placed in the furnace, so that the wood does not directly contact the bottom of the furnace body, while it can facilitate the entry of air, so that the wood can be fully burned. Chimney base chimney: The furnace body is only 5.7 cm thick when folded and can be placed directly in a tote bag or backpack. Attention: Titanium are more likely to produce fingerprints compared to stainless steel, and fingerprints are not very easy to remove. It is recommended that you wear gloves first when you open the box and then install the furnace.