Function 1. Remote anti-theft Press the lock button on the remote control once; the direction indicator flashes once and the horn sounds once to enter anti-theft mode. The vibration sensor is activated, and the motorcycle engine enters a locked state, preventing vehicle startup. 2. Remote control release Press the unlock button on the remote control once; the direction indicator flashes twice and the horn sounds twice to deactivate the anti-theft system. Manually turn the key to start the vehicle normally. 3. Silent anti-theft Press the mute button on the remote control once; the turn signal flashes once and the horn sounds once. Press the mute button again after three seconds; the turn signal flashes once without horn sound, entering silent anti-theft mode. If vibration is detected, the direction indicator flashes but the horn remains silent. 4. Remote start Press the mute button on the remote control twice to start the motorcycle engine remotely. The vehicle can be driven without manually turning the key. During remote operation, press the mute button once to shut off the engine remotely. 5. Remote search Press and hold the search button on the remote control for 2.5 seconds; the direction indicator flashes five times and the horn sounds five times to locate the vehicle. Specifications Voltage: 12V 2V Static current: less than 15mA Frequency: 433.92MHz Code: learning code Operating distance: approximately 6080 meters Remote control battery: CR2016 6V (battery not included) Compatibility: suitable for all 12V motorcycles, compatible with AC start models APP and remote control pairing: Open the motorcycle APP and follow the on-screen prompt. Enable Bluetooth on the mobile device. A green dot on the Bluetooth icon indicates Bluetooth is active. Tap the gear icon in the top right corner to access settings. Press the learn code button once, then simultaneously press two buttons on the remote control to complete pairing.