Features: *Use for 17/18/19 Band Saw Wheel, Width is 34.42mm (1.35''). *It is suitable for 17/18/19-inch woodworking band saw wheels, but it does not mean that our Rubber Band size is as large as 17/18/19 inches. *The rubber band needs to be stretched. After receiving the goods, put them in hot water and heat them to spread evenly. *Then hang it hard on the wheel without adding glue! *In order to ensure that the anti-skid rubber ring can be tightly combined with the outer edge of the wheel, and avoid slippage during sawing and insufficient cutting force due to the loose rubber ring, the circumference of all anti-skid rubber rings must be smaller than the circumference of the band saw wheel. *Please make sure you know the above information before purchasing. Installation method: 1. Remove the original damaged rubber ring. If there is rubber ring residue on the outer edge of the wheel, please clean up the residue. 2. Soak the new anti-skid rubber ring in warm water for 3-5 minutes, and install it after the rubber ring is softened. 3. When installing, start from side of the wheel, press end of the rubber ring firmly into the groove on the outer edge of the wheel, and then use a flat-blade screwdriver to slowly pry the rubber ring into the groove on the outer edge of the wheel. Do not use too much force. It is so violent that the rubber ring is damaged. 4. If necessary, you can place a few drops of glue along the grooves on the edge of the wheel to ensure a more secure installation. Specifications: Product Name: Band Saw Rubber Band Material: Rubber Color: Black Width: 34.42mm / 1.35'' Suitable for: 17/18/19 InchWoodworking Band Saw Quantity: 1Pc Package Included: 1 Band Saw Rubber Band Note: 1.Transition: 1cm=10mm=0.39inch. 2. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 3. Please allow slight manual measurement deviation for the data.