1 pcs 44 Pin Adapter Compact Flash CF Card Adapter & 1 pcs 6000RPM Cooling Fan 44 Pin CF compact flash adapter. The host PC will identify the inserted CF as standard 2.5 inch IDE HDD Fully 2.5 inch IDE compatible which allows them to be used as hard drive replacements for embedded applications Compact flash to 2.5 inch IDE adapter provides an alternative for data storage For connecting a CF to 2.5 inch IDE host interface color: picture color Material: Plastic 44 Pin Adapter Compact Flash CF: Low power consumption, low operating temperature, no acoustic noise, cost efficient and fast read access time Transparent to the operating system and does not require any drives Master / slave jumper selectable 2.5 inch IDE male connector (44 pin) For DOS use, make sure this set as primary master, and perform format For Linux use, please make sure run lilo or grub on the boot sector of the CF card For Windows use, it should be treated as master drive on the IDE bus Compatible: CF Type I / CF Type II / CF Type III / MicroDrive System Requirement: for AMD, Pentium, Celeron, : WIN 98SE/ ME/ 2000/ XP/ VISTA Important: Please do not plug the compact flash card while power on Cooling Fan: Connector Type: 2 Pin Connector; Voltage / Current: DC 12V / 0.08A; Bearing Type: Sleeve Bearing Motor Type: DC Brushless; Speed: 6000 RPM;Air Flow: 2.46 CFM Air Pressure: 3.0 mm-H2O; Noise: 18 ; Blade: 7 Blade Cable Length: 100mm / 3.9 inch ; Total Size: 30 x 30 x 10 mm / 1.2 inch x 1.2 inch x 0.4 inch (L * W * H); Improve the air flow, wide used for computer chipset, VGA cooler, compact PC case, or other matched radiator. Package Contents: 1 x 44 Pin Adapter Compact Flash CF 1 x Cooling Fan Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.