Capacity: 100g Features: Our hand mask powder DIY set is carefully formulated with model powder: talcum powder, sodium alginate, calcium chloride, casting powder: calcium carbonate, calcium sulfate. Designed for easy production of three-dimensional hand models and freezing precious moments. The method of use is extremely convenient: add molding powder and water to the bucket and stir evenly with a stirring rod. Put your hand into the solution and wait for 3-5 minutes. When the solution changes color and solidifies, gently shake your arm to remove it. Wear gloves, add casting stone powder and water to another container, and stir evenly with a stirring rod. Pour the mixture into the mold and tap the edge of the bucket to reduce bubbles. Wait for more than 30 minutes for it to solidify, and then peel off the outer layer with a pointed stick. You can use sandpaper to fortreat the forsurface of the model to make it more beautiful. And the gaps can be finely filled to improve the smoothness of the model forsurface. Product includes:1set Hand Plastic Powder DIY Note: Please allow slight size error (1~2cm/0.39~0.78inch) due to manual measurement, which is subject to the actual received; Please allow slight color error under different monitors.