Description 10 Units AD9833 Programmable Microprocessors Serial Interface Sine-Square Wave DDS, Signal Generator Module [AD9833] The AD9833 is a low-power programmable signal generator capable of producing sine, triangle, and square wave outputs. Waveform generation is required in various sensor, actuation, and time-domain reflectometry (TDR) applications. [Compact Design] Output frequency and phase are software-programmable, allowing for easy tuning. No external components are required. The frequency registers are 28 bits wide: a resolution of 0.1 Hz can be achieved at a clock rate of 25 MHz; With a clock rate of 1 MHz, the AD9833 can be tuned to a resolution of 0.004 Hz. [High Performance] The AD9833 features a standard serial interface, allowing it to be directly connected to multiple microprocessors. The device uses an external serial clock to write data or control information to the device. [Applications] The AD9833WBRMZ-REEL model is available with controlled manufacturing to meet the quality and reliability requirements of automotive applications. Note that this automotive model may have specifications that differ from commercial models. Therefore, developers should carefully read the "Specifications" section of this datasheet. Color: Blue Material: Printed Circuit Board Package Contents: 10 x AD9833 Sine Wave Square Wave DDS Signal Generator 10 x Pins Only the above package contents, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture to be slightly different from the real thing. The allowable measurement error is +/- 1-3 cm.