105 Right Angle Drill Driver can be connected to drill, rechargeable drill, or hand wrench, expanding reach for stenoids, torque screws, nuts and more. 105 design for tight spaces, increases the horsepower of a cordless screwdriver - 100 in / lbs. Torque: 400 rpm. These tools are great for easy drilling, speed / slow screwdriving, like cordless drills, ratchet screwdrivers, etc. Chrome vanadium steel 105 angle extension, high hardness drill holder and durable die-cast housing with 3 ball bearings for long life. Built-in strong magnet for good holding force, easy to operate and prevent falling. 105 degree angle extension, 360 parallel adjustment, perfect and practical tool for hard to reach corners and tight spaces, maximum torque of 15 n / m. 3 socket adapters for installing pneumatic screwdrivers, electric screwdrivers, pneumatic drill, manual screwdriver and other installations for the hex tool. It is a good accessory for the adapter and drive reducer conversion kit. Product Description : Corner extension. 1/4 "" hexagonal screwdriver extension, convenient, durable, easy to use. It is good for wrenches and drills, rechargeable drills or a manual wrench. Lightweight, fast, plugs into a standard hex screwdriver. Function head with lock and magnetic function, 105 degree right angle head. Characteristics : Material: stainless steel. Dimensions: 5.9 x 3 cm. Color: silver. Torque capacity: 16N. It only allows 1/4 hex bits. Not suitable for impact drills. Over 1/4 inch adapter / extension kit Suitable for 1/4 "" Quick Change chuck systems or directly into the chuck. Turn any electric drill into a Power Mother driver. Convenient for quick training of nuts, screws and fasteners, etc. Spring loaded ball bearing on the head to keep the grips firmly in place. Widely used in DIY, kitchen, car parts, specializing in machine repair, etc. Characteristics : Weight: about 100g. All standard 1/4 "" hex shank bases. Dimensions: 1/4 x 1/4 x 65mm in length - The 1/4 "" shank can be converted to a 6.35mm square head. 3/8 x 1/4 x 65mm in length - The 1/4 "" shank can be converted to a 9.4mm square head. 1/2 x 1/4 x 72mm in length - The 1/4 "" shank can be converted to a 12.6mm square head. Contents: 1 adapter (1/4 "" hexagonal shank to 1/4 "" socket). 1 socket adapter (1/4 "" hexagonal shank to 3/8 "" socket). 1 adapter (1/4 "" hexagonal shank to 1/2 "" socket). 1 x 105 angle hammer adapter.