Please note that only one pair of door handles is included, suitable for one door. If you have two shower doors, please order two sets. This sleek, contemporary curved shower door handle fits doors with holes 145mm (14.5cm) apart and serves as a perfect replacement for a broken handle. Screw caps are included. The handle protrudes approximately 32mm from the glass plane and fits glass doors with hole diameters larger than 7mm. The back-to-back design ensures both sides are identical. Made of high-quality metal, these handles are suitable for heavy glass doors. Compatible with various shower door types, including sliding and swing doors.Fitting Instructions: Installation is simple and requires only a Phillips cross-head screwdriverno professional tools or expertise needed.1. Remove the old handles. If they have protective caps, locate them on the inner side of the handle and gently pry them out using a small tool such as a pin or needle.2. Unscrew the existing screws. When removing the second screw, support the opposite side of the handle to prevent it from dropping once the screw is fully removed.3. Position the new handle by placing the outer part (without exposed screw holes) on the outside of the glass and the inner part (with screw holes) on the inside. Align both pieces and insert the top screw, leaving it slightly loose for adjustment.4. Insert the second screw, also leaving it slightly loose initially. Adjust the alignment to ensure the handle is straight, then fully tighten both screws.5. Test the handle by operating the shower door to confirm stability and secure fit.6. Once satisfied with the installation, press the screw caps into place to complete the finish.