تفاصيل المنتج
15000W Integrated Solar Power Generation Kit
This off-grid solar power kit provides an integrated electricity generation and conversion system for recreational vehicles, outdoor camping, marine use, and emergency residential backup. Combining a high-efficiency monocrystalline solar panel, an intelligent 12V/24V SOECOPO LCD charge controller, and a 1400W continuous pure sine wave power inverter, this setup converts solar radiation into regulated DC electricity and household AC power. Engineered to operate in conjunction with an external 12V battery, the system powers mobile communication devices, lighting, home appliances, and electrical tools.
Key Features & System Performance
Clean Pure Sine Wave Output: Delivers 1400W continuous (up to 15,000W peak surge) AC power with low harmonic distortion, enabling safe operation for inductive loads, microelectronics, refrigeration compressors, and variable-speed power tools.
High-Efficiency Monocrystalline Silicon: Fabricated with monocrystalline solar cells on a durable aluminum substrate with protective PET lamination to optimize light absorption and maintain stable output.
Intelligent Auto-Detect Charge Controller: Automatically recognizes 12V and 24V battery systems, regulates current flow (30A–100A rating), and displays real-time voltage, current, and battery levels on a digital LCD screen.
Multi-Port Power Distribution: Provides DC 18V solar charging, dual 5V USB ports for mobile devices, and standard AC household outlets on the inverter module.
Comprehensive Circuit Protection: Built-in safeguards protect against battery overcharging, over-discharging, short circuits, thermal overload, and reverse polarity.
Technical Specifications
Photovoltaic Solar Panel
Rated Power: 25W (Operating range up to 300W peak)
Output Interfaces: DC 18V + USB 5V
Cell Type: Monocrystalline Silicon
Substrate & Surface Material: Aluminum Substrate + Weather-Resistant PET Film
Dimensions: 540 mm × 280 mm (21.25" × 11.02")
SOECOPO Intelligent Charge Controller
System Voltage: 12V / 24V Automatic Recognition
Rated Current Capacity: 30A – 100A
Monitoring Interface: Digital LCD Screen (Real-time Voltage, Current, Battery Level)
Auxiliary Output: Dual USB 5V Ports
Operating Temperature Range: -35°C to +60°C
Pure Sine Wave Power Inverter
Continuous Rated Power: 1400W
Peak Surge Capacity: 15,000W
DC Input Voltage: 12V
AC Output Voltage: 220V / 110V
Conversion Efficiency: > 90%
Output Waveform: Pure Sine Wave
Appliance Compatibility & Load Reference
Household Electronics
Mobile Phone & Tablet Chargers: 5W – 10W
Laptops & Notebooks: 60W – 120W
Electric Floor Fans: 40W – 80W
55-Inch Televisions: 50W – 150W
Refrigerators: 80W – 250W
Microwave Ovens: 700W – 1200W
1 HP Air Conditioners (Wall-Mounted / Portable): 800W – 1200W
Outdoor & Camping Gear
Portable LED Lighting: 5W – 30W
Drone Battery Chargers: 50W – 100W
Digital Projectors: 80W – 200W
Electric Ovens: 800W – 1200W
Coffee Machines: 600W – 1200W
Tools & Utility Equipment
Cordless Tool Charging / Electric Wrenches: 200W – 500W
Hand Drills: 300W – 600W
Percussion & Rotary Hammer Drills: 800W – 1200W
Water Pumps: 500W – 1200W
Battery Selection & Capacity Sizing Guide
The operating output of the inverter depends on the capacity and discharge rating of the connected 12V battery:
Calculating Output from an Existing Battery:
Maximum Output Power (Watts) = Battery Voltage (V) × Battery Capacity (Ah) × 0.72
Calculating Required Battery Capacity for Desired Load:
Required Battery Capacity (Ah) = Inverter Output Load (Watts) / Battery Voltage (V) / 0.72
Standard 12V Battery Output Capabilities
70Ah Battery: Up to 604W continuous power output
100Ah Battery: Up to 864W continuous power output
150Ah Battery: Up to 1296W continuous power output
Installation & Operating Instructions
Protective Film Removal: Peel off the clear protective transport film from the surface of the solar panel prior to deployment.
Controller-to-Battery Connection (Prerequisite): Connect the charge controller to the 12V battery terminals using the supplied controller alligator clips. The controller requires battery power to initialize and detect voltage before receiving solar power.
Panel-to-Controller Connection: Connect the DC output cables from the solar panel into the solar input terminals on the charge controller.
Inverter-to-Battery Connection: Attach the inverter directly to the 12V battery posts using the heavy-duty inverter cables and clamps.
Solar Exposure: Position the solar panel outdoors angled directly toward sunlight. Avoid placing the panel behind window glass or beneath tree shade.
Package Contents
1 x Monocrystalline Solar Panel (540 mm × 280 mm)
1 x SOECOPO Intelligent LCD Charge Controller
1 x 1400W Pure Sine Wave Power Inverter
1 x Controller Alligator Clip Set
1 x Inverter Battery Clamp Set
2 x DC Cables (Red / Black)
1 x 12V Vehicle Inverter Connector Cable
4 x Mounting Suction Cups
2 x Heavy-Duty Carabiners
1 x User Manual
-
هوية Fruugo:
532227016-1079308811
-
EAN:
6168578657294