Description: Upgrade to high-quality brushless PTZ control panel, chips are original chip, increase the supply anti-reverse polarity protection, counter-power to prevent customers from unintentional indirect cause significant damage Better accuracy sensor chip, and change the sensor interface, the connection is more solid, easy to loose, IIC error does not occur Upgrade the roof, increasing the head hook hole, easy to use PTZ hook You can use the remote real-time control of pitch and roll angle Extended function: to set flip, installed on fixed wing Specification: Material: CNC Aluminium alloy Motor: Model 2206 100T Brushless motor Control Panel: SimpleBGC _GUI_2_2b2 Brushless control panel Software: GUI_V2.2 Strap: for 3 3+ 4 or 60-100g series sports camera. Battery plug type: JST Voltage: 12V/3cell Lipo battery Compatible model: for DJI Phantom 1 2 and other DIY drones Net weight: 108g 1. Remove the damping balls, open the top cover of the mounting plate. 2. Install the top cover of the mounting plate to the bottom of the DJI phantom. 3. Install the damping balls. 4. Install your camera,and fasten it with straps Size Chart: Size: approx. 80 x 80 x 63mm/3.15 x 3.15 x 2.48inch Package Includes: 1 Piece Brushless PTZ Control Panel(with some screws) 1 Piece Cable 1 Piece Camera Ties Note: 1. Recommended power supply for the gimbal is 12V 2. The camera must fasten on the gimbal 3. Adjust the camera left or right, let the camera almost at level 4. Please do not power on the gimbal until the camera is fixed on the gimbal