ESP32-C6-Pico is a small microcontroller development board equipped with a variety of digital interfaces. In terms of hardware, the ESP32-C6-MINI-1 module is used, which is equipped with a RISC-V 32-bit single-core processor, supports a clock frequency of up to 160 MHz, and has built-in 320KB ROM, 512KB HP SRAM, 16KB LP SRAM and 4 MB flash; the pin interface is compatible with the Raspberry Pi Pico development board and can be expanded to a variety of peripheral devices, making it more convenient to use. In terms of software, you can choose ESP-IDF development environment or For Arduino IED for development, so you can get started easily and quickly and apply it to products. Using ESP32-C6-MINI-1 module, equipped with RISC-V 32-bit single-core processor, supporting clock frequency up to 160 MHz Product Features Integrated 320KB ROM, 512KB HP SRAM, 16KB LP SRAM and 4MB Flash memory Integrated 2.4GHz Wi-Fi 6 and Bluetooth LE dual-mode wireless communications with superior RF performance Using USB Type-C interface, no need to worry about plugging forward and reverse It leads to rich peripheral interfaces, and the pin interface is compatible with the Raspberry Pi Pico development board, with strong compatibility and scalability. Stamp hole design can be directly welded and integrated into the base plate designed by the user. Supports multiple low-power working states and can adjust the balance between communication distance, data rate and power consumption to meet the power consumption requirements of various application scenarios Please note that to ensure the functional integrity of the device, be sure to call the provided WS_TCA9554PWR file to set GPIO22 (SDA) and GPIO23 (SCL) as I2C functions for GPIO expansion Please note that GPIO22 (SDA) and GPIO23 (SCL) are already used in TCA9554PWR. Currently, only I2C slave devices can be connected to these pins. These two pins are no longer allowed to be used for other functions. Due to different batches, the appearance, col