Feature: 1. 4 Working Channels: Both the handle and the main unit of the hot air rework station have four working channels, and the air volume and temperature of each channel can be set and stored. 2. Magnetic Switch Control: The hot air rework station is easy to operate in real time, with magnetic switch control, the handle is placed on the handle frame and immediately goes to sleep. With automatic sleep function, in the sleep state can be set to the parameters. 3. Temperature Adjustment: Hot air reworking station sensor closed circuit, microcomputer over zeroing trigger temperature control, high power, rapid temperature rise, temperature adjustment is convenient and accurate and stable, not affected by the amount of air. 4. 3 Heating Modes: Hot air reworking station has three heating modes, using brushless fan, adjusting air flowing, large range, large air pump, air volume up to 200 levels of output, the system is equipped with automatic large air volume cooling function for protecting the hot air handle. 5. Multi Purpose: Hot air rework station is suitable for desoldering of many kinds of components, such as SOIC, CHIP, QFP, PLCC, BGA, etc. Disinfection, glue soldering, etc. Suitable for heat shrinkage, drying, paint removal, thawing and preheating. Specification: Item Type: Hot Air Rework Station Material: Aluminum Alloy Maximum Power: 1300W Frequency: 50Hz 60Hz Temperature Range: 100-550℃(212-1022℉) Due to the display setting can only display up to 999℉ Inner Box Size: Approx. 399 x 336 x 264mm / 16 x 13 x 10in Range of Airflow Gear: 1-200. Package List: 1 x Soldering Station4 x Air Nozzle1 x Air Gun1 x Air Hose 2 x Gasket1 x Stand Table1 x Soldering Station Power Cord1 x Connection Cable1 x Screwdriver1 x Guide Frame3 x Accessories1 x Instruction Manual