1.Comply with SAE J1772 standard2.Beautiful appearance3.The pin head is designed with safety insulation to prevent accidental direct contact with human hands4. protection performance, the protection level reaches IP54Way of Use:EV Charger j1772 type 1 to type 2 adapter has two sides. One side is connected to J1772 plug; another to type 2 EV socket. Convenient for European Standard vehicle to charge on charging connector. It is used to connect the charging pile end plug to the TYPE 2 car end socket for charging.Note:EV Type 1 to type 2 adapter the female plug must be connected to the car end male for normal charging.Mechanical behavior:1.Mechanical life: no-load plugging and unplugging 10000 2.Insertion force during coupling: 45N less than 80NElectrical performance:1.Rated working current:32A2.Working voltage:110V-250V3.Insulation resistance: 1000M ohm (DC500V)4.Terminal temperature rise:less than 50K5.Withstand voltage:2000V6.Contact resistance:0.5m ohm Max retardant grade:UL94 V - 0State of waterproof level:IP54 (work)Shell material:thermoplastic, retardant grade UL94V-0Pins:Copper Alloy temperature:Working environment temperature:-30-+50Colour:BlackMaterial:plasticPackage Contents:1 * EV Adapter ConnectorOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.