Features 1、[FOR RADIO EQUIPMENT] Used to measure the matching characteristics of passive and active radio equipment, such as antennas, cables, filters, attenuators, amplifiers, etc. 2、[WIDE FREQUENCY RANGE] 23MHz to 6200MHz wide operating frequency range, full frequency range 0.25 dB and 1.5°, to achieve high accuracy measurement. 3、[3.2IN TOUCH SCREEN] With 3.2in color touch screen, can quickly configure scan parameters and display measurement results, scan speed up to 1000 points/sec. 4、[INDEPENDENT MARK] Ability to display up to 4 independent markers on all graphs for accurate evaluation of measured parameters. 5、[MULTIPLE DISPLAYS] Can display almost all possible reflection coefficient descriptions, measure cable faults and loss distances. 6、[WIDE APPLICATION] The vector network analyzer VNA is very suitable for radio frequency circuit matching and debugging of Bluetooth, WiFi, 2.4G, 5.8G, and GPS. 7、[ALUMINUM ALLOY] The shell is made of aluminum alloy and adopts the form of a mobile automatic instrument, which is light in weight and compact in structure. Specification Item Type: Vector Network Analyzer Material: Aluminum Alloy Color: Black Model: GS-320 Operating Frequency Range: 23-6200MHz Frequency Resolution: 10kHz Maximum Scanning Points: 1000 Scanning Speed: 1000 points/sec Bridge Direction, Uncorrected in the Entire Range: >12dB Effective Directivity (after Full Single Port Calibration): >50dB Standing Wave Ratio at the Input: <2 Phase Measurement Accuracy: >1.5 degrees Amplitude Measurement Accuracy: >0.25dB Resolution to Determine the Distance to the Fault Point: (C x VF) / 2S m Measuring Cable Maximum Length: Approx. 3000m / 9842.5ft (VF=1) Display Chart: Smith chart; polar chart; phase of reflection coefficient; amplitude; logarithmic amplitude; VSWR, fault distance; cable loss Operating Temperature Range: 0-+40℃ Screen Diagonal: 3.2 inches Screen Type: Resistive touch Screen Resolution: 320х240 Battery Capacity: 4000mAh lithium battery(built in battery) Battery Life: ~4 hours Battery Charging Time: ~6 hours Package List 1 x Network Analyzer 1 x Type-C Data Cable 1 x Touch Screen Pen 1 x SOL Calibration Part 3 x Adapters 1 x English User Manual