Item Type: Video Switcher_x000D_Material: ABS_x000D_Wide Voltage Power Supply Input: DC8V-16V, large truck: DC24V-12V power supply_x000D_Remote Control Battery: CR2025 (included), capacity: 170mAh_x000D_Converter Size: Approx. 80 x 40 x 20mm/3.1 x 1.6 x 0.8in_x000D_Wireless Remote Control Size: Approx. 40 x 10mm/1.6 x 0.4in_x000D__x000D_Wiring:_x000D_1. The blue wire is connected to the reversing light for trigger control_x000D_2. The white wire is connected to the left flashing light for trigger control_x000D_3. The green wire is connected to the right flashing light for trigger control_x000D_4. The red and black wires are +12V power input wires_x000D_5: Remote Control: M key-mode switch and exit video output trigger function_x000D_B button rear view_x000D_R key right view_x000D_L key one left view_x000D_F key-front view_x000D_(The dual-mode control method of this product, the automatic electronic line can also be disconnected, and the remote control is as convenient as using the remote control. In the process of using the trigger rear view to exit to the front view 7S, it only supports the reversing trigger rear view function, which mainly reduces the misoperation._x000D__x000D_Remote Control Setting LED Light Instructions (only support products with remote control)_x000D_1. When the remote control button presses any key to work, both the indicator light receiver and the remote control LED will flash, indicating that the transceiver is normal._x000D_2. Long press the M button on the remote control for 5 seconds, the receiver LED will flash 2 times, indicating the functions of Mode 1 "Automatically switch to front view after rear view" and Mode 2 "Exit directly after closing back view". Perform switching work. Finally, restart the power to use._x000D_3. Remote control codes matching mode, often press the receiver button for about 3S, the LED light of the receiver goes out, press any button of the remote control, the receiver LED flashes twice, indicating that the codes is completed, and finally restart the power to use. 14?channel video input: left view, right view, rear view and front view. Each group of video input has a DC+12V to power the camera. 2The output shares a video channel and outputs a power cord that triggers the screen. Designed with a power supply protection circuit to protect the camera and the vehicle circuit. 3Using wireless remote control, single?chip intelligent circuit detection, precise control, stable performance and high reliability. 4Support various car decoders, add multi?channel cameras and video input. Supporting decoders, and then use DVD or car monitors to solve the blind spot on the car. 5It can detect the left and right steering and reversing of the car to switch to the corresponding video channel. When exiting the reversing state, the video source switches to display front view 7s (this function can be selected according to the situation), and then returns to the default video output off state. 1 x Video Switch Box 1 x Remote Control