Benefits at a glance Flexible operation: can be set to selflocking (latching) or inching (momentary) mode to suit toggle or momentary control needs. Clean panel design: touch sensing distance up to 8 mm enables convenient control on acrylic panel casings and veneers. Directdrive power: supports DC 3 to 30 V and up to 2.5 A, able to directly power many lowpower devices such as LED lamps and related loads. Simple poweron behavior: output state after power on can be configured based on resistance at point A (with resistance, output closes after power on; without resistance, voltage is output after power on). Key features and specifications Type: touch type single key bistable switch Modes: selflocking or inching Sensing distance: up to 8 mm Working voltage: DC 3–30 V Maximum output current: 2.5 A Load compatibility: suitable for directly driving various lowpower electrical appliances, lamp belts, LED lamps, and similar loads Output state on powerup: selectable by resistance at point A; with resistance at A, output closes after power on; without resistance at A, voltage is output after power on Intended use: touch switch control for acrylic panel casings and veneers Practical applications LED strip or lamp control behind an acrylic panel: use the touch switch to turn lights on/off with a clear, clean panel look. Cabinet or furniture with veneer finishes: use selflocking or momentary mode to control lighting or small electrical loads from the front face. Small appliance control in compact electronics projects: drive lowpower devices directly from the switch without extra driving circuitry. Notes on compatibility and usage Designed for lowpower loads within the 3–30 V DC range and up to 2.5 A output. Suitable for use on acrylic panel surfaces, casings, and veneers where a touchoperated control is desired. Output behavior on powerup is configurable via resistance at point A to match specific circuit requirements.