Original LCD Screen for Mi 10T 5G, Mi 10T Pro 5G, Redmi K30S, M2007J3SC, M2007J3SY with Digitizer Full Assembly About the product 1. Replacement LCD screen and touch screen digitizer assembly for Mi 10T 5G, Mi 10T Pro 5G, Redmi K30S, M2007J3SC, M2007J3SY 2. Replace your broken or non-functional screen with a new one 3. Restore your device to a like-new appearance 4. Designed for full compatibility and proper function 5. Each unit is tested and inspected before shipment 6. Professional installation is highly recommended. No responsibility will be taken after installation Before Installation Notes Tip 1: Test before installation Do not remove any protective films or labels during testing. Be aware of static electricity. Before beginning any repair, use an ESD (electrostatic discharge) strap to ground yourself to prevent damage to internal components. Wear eye protection and handle glass carefully to avoid injury from sharp edges. Tip 2: Perform a test fit This is a fragile component. Test functionality before full installation. Disassemble the phone, connect the motherboard to the new LCD/screen assembly via the display cable, power on the device, and verify full operation. If the screen functions properly, proceed with full installation. If there is no display, contact the seller immediately. Do not force installation if the screen does not work. No responsibility will be taken after installation. Tip 3: Avoid excessive cable bending Do not bend the LCD cable beyond 90 degrees. Excessive bending may result in display failure or black screen.