Feature: 1. High sensitivity 2. Stable performance 3. Energy efficient and environmentally friendly 4. Compact design, easy to install 5. Wide application range — suitable for stairs, hallways, corridors, restrooms, cabinets, office buildings, schools, community facilities, and other public areas for controlling low-voltage LED light strips The sensor is designed for low-voltage LED light strips. When motion is detected within the sensing range, it detects changes in infrared radiation emitted by the human body, automatically turning the connected load on or off. Lights activate upon presence and turn off after a set delay when no motion is detected — offering convenience, safety, and energy savings. Specifications: Product name: LED Light Strip Sensor Switch Material: Plastic Detection angle: 120° Delay time: 1–10 minutes (adjustable) Detection distance: 8 m (at 24°C) Recommended installation height: 2–3.5 m Operating temperature: –20°C to +60°C Rated load: 6 A / 8 A Color: Black Dimensions: 76 × 45 × 34 mm Power consumption: < 0.5 W Input voltage: DC 12–24 V Working frequency: 50/60 Hz Operation mode: Day and night (no ambient light dependency) Operating humidity: < 93% RH Mounting: Screw-fixed with two mounting holes (center-to-center distance: 66 mm) Wiring: - INPUT: Power input — connect to DC 12–24 V power supply - OUTPUT: Load output — connect to LED light strip Package includes: 5 × Automatic Sensor Switches Note: Color may vary slightly due to screen settings and lighting conditions. Dimensions are subject to a tolerance of ±1–3 cm.