Condition: 100% brand new_x000D_ Item type: Electronic Handwheel_x000D_ Material: plastic_x000D_ Color: As picture shown_x000D_ Handwheel dameter: Approx. 65mm/2.6in_x000D_ Weight: Approx. 137g _x000D_ Encoder_x000D_ Power supply voltage: DC510%_x000D_ Pulse number: 100PPR_x000D_ (VH) output voltage (maximum): 3.8V_x000D_ (VL) output voltage (minimum): 0.3V_x000D_ Output current: 80mA_x000D_ Model format: A.B.A-.B-_x000D_ Output resistance: DIFF_x000D_ Reaction speed: 5KHz_x000D_ Current consumption 50mA_x000D_ Starting torques (maximum): 150g_x000D_ Axial volume (minimum): R 2kg10%_x000D_ Rotation life (minimum) :1KKR_x000D_ Operation temperature: 0/+50_x000D_ Storage temperature -10/+70_x000D_ Operation humidity: 35-80%_x000D_ Vibration resistance: 0.5G_x000D_ Heavy strike resistance: 2G_x000D_ Wiring table_x000D_ Output Signal: A B V0 V+ A- B-_x000D_ Terminal-Line Driver A: 1 2 3 4 5 6_x000D_ _x000D_ YP600-100B-1L represents a large handwheel with a diameter of 65mm, the output is 100 pulses, the working voltage is 5V, and the output mode is long-line output. This product is suitable for CNC machine tools, two orthogonal output signals (A, B), 100 pulses , The output mode is long-line drive. 1High?grade CNC handwheel. 2High?quality components, strong product durability. 3Voltage 5V 100PPR A A? B B?. 4Professional manufacturing, stable performance and high reliability. 5Suitable for CNC machine tools, two orthogonal output signals (A, B), 100 pulses, long‑line drive output.1. The encoder is a precision instrument. It is forbidden to knock, drop, crash, etc. during installation. Improper installation or use will affect the performance and service life of the encoder._x000D_ 2. Pay attention to the shaft load of the encoder during installation, and must not exceed the limit load._x000D_ 3. Be careful not to exceed the limit speed of the encoder during use. If the speed exceeds the limit, the electrical signal of the encoder may be lost._x000D_ 4. The wiring must be correct. If the wiring is wrong, the internal circuit of the encoder will be damaged. Insulate the unused cables before the first start._x000D_ 5. The maximum response frequency is limited by the maximum speed.1 xElectronicHandwheel