Performance parameters: Specification: 6S is compatible with 1.5A for 5S. Serial quantity: 6S (downward compatible for lower serial) Equalizing current: 1.5A maximum (different from differential pressure, internal resistance, line resistance, etc., the greater the differential pressure, the greater the current) Equalization accuracy: 0.03V Applicable battery: 3.2V/3.65V/3.7V/4.2V lithium battery or lithium iron phosphate, ternary lithium universal to: capacitor, lithium titanate battery. Balance mode: active energy transfer. Equilibrium efficiency: 92% color: Black Material: PCB Equalization logic: in the unit of two adjacent batteries, multiple columns are synchronized Trigger condition: adjacent differential pressure 0.1V Equalizing current: 800ma Equalization stop: adjacent differential pressure Less than 0.03V Equalization period: full voltage period (including charging, discharging and idle) Low voltage protection: battery voltage is lower than 2.5V Sleep power consumption: 2uA low power consumption, battery can be idle for a long time Equalization indication: when the light is on, it means that the equalization is in progress; when the light is off, it means that the equalization is completed; when the light flashes, it means that the internal resistance of the battery is high or is dropped or suspended Built in installation: suitable for battery internal installation and long-term use Other instructions: used together with the protection board or the protection board with passive equalization, without mutual influence Wiring logic: take No. 0 (B -) as the total negative pole for forward connection, without wrong sequence or reverse connection Product size: 42 x 27mm Different production batches, the appearance will bea little different, it will not affect the use Package Contents: 1 x 6S equalizing board 1 x Connecting line Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.