A Refilling Adapter Kit to Connect a SodaStream Quick Connect to a W21.8 CO2 Tank.

٢٧٫٩٥٠ د.ب.‏
والشحن مجاناً

A Refilling Adapter Kit to Connect a SodaStream Quick Connect to a W21.8 CO2 Tank.

  • العلامة التجارية: Unbranded

A Refilling Adapter Kit to Connect a SodaStream Quick Connect to a W21.8 CO2 Tank.

  • العلامة التجارية: Unbranded
سعر البيع القطاعي المقترح: ٥٤٫٠٠٠ د.ب.‏
السعر: ٢٧٫٩٥٠ د.ب.‏
أنت توفر: ٢٦٫٠٥٠ د.ب.‏ (48%)
البائع:
٢٧٫٩٥٠ د.ب.‏
والشحن مجاناً

في المخزون

نقبل وسائل الدفع الآتية

الوصف

How it works: In order for you to use it correctly, please follow our instructions: 1.Cool the soda machine Cylinder in the freezer for 1 hour. 2.Screw the CGA320/W21.8 connection to a commercial CO2 gas cylinder. 3.Disconnect the quick connector of the black adapter, and then tighten the black adapter to the CO2 cylinder( must turn the knob on the top of the black adapter to the highest position,the whole process does not need to turn the adapter knob down to open the CO2 cylinder,If the adjusting rod press down 6mm wide valve pin, this will close the valve and CO2 cannot enter) 4.Connect the quick connector 5. For most big cylinders: turn the big cylinder upside down or lie it down.some host tank has not the dip/syphon tube inside. 6.Carefully Open the valve of the large gas bottleThe valve on the CO2 Cylinder closes the flow if it is opened to much. This will happen if you open the big cylinder too much / too fast. The trick is to open the big cylinder very carefully. You will hear the air flow. So to fill it successfull 7.After about 15-20 sec., The cylinder is completely filled 8.Close valve of the large gas bottle 9.Opening the bleed screw to drain residual gas 10.Unscrew the CO2 cartridge done Please note: 1.If there is liquid CO2 inside the cylinder, please upside down your CO2 tank if you can not refill when the CO2 tank standing,because some of tank have not the dip tube (syphon tube)inside. 2.The cylinder should be empty.Pre Cooled cartridges will get quite full. 3.need to open the tank valve very slowly when you filling the protection valve(6mm wide pin) of soda machine bottle. 4.Our adapter don't work RPV valve (residual pressure valve),please find picture as follow,but some of RPV valve can be removed by hex wrench,please check before ording. If your big tank has a RPV valve,you can choose "RPV pushing adapter" in option to make order. Note: 1. Please allow 1-3 mm error due to manual measurement and 1-3g weight error make sure you don't mind before ordering. 2. Due to the lighting of the photos and the difference of monitors, the pictures may not reflect the actual color of the real item. Please make sure you don't mind before ordering, thank you! About Shipping: 1.please pay attention to your delivery address such as: name, street, house number, doorbell/email without name, etc. is correct, or the order will not be delivered correctly. 2.All items will be shipped within 3 business days after the payment is received. Most times you will receive them within 8-12 days then. The specific delivery time is depend on circumstances. 3.During the shopping process, if you have any questions, please feel free to consult us, we will reply you within 24 hours Hope you have a pleasant shopping experience!
  • هوية Fruugo: 407368462-863387835
  • EAN: 5424521512487

معلومات سلامة المنتج

يرجى الاطلاع على معلومات سلامة المنتج الخاصة بهذا المنتج الموضحة أدناه

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

تحذيرات السلامة: Children must be accompanied by their parents when using

التسليم والرد

يُرسل خلال ٣ أيام

  • STANDARD: مجاناً - التسليم بين الثلاثاء 07 أكتوبر 2025 – الثلاثاء 14 أكتوبر 2025 - مجاناً

يُشحن من الصين.

نحن نبذل قصارى جهدنا لضمان أن تصلك المنتجات التي تطلبها بالكامل وطبقاً المواصفات التي حددتها. إلا أنه في حال تلقيك طلب غير كامل أو أغراض تختلف عن تلك التي طلبتها أو كان هناك سبب آخر يدعوك لعدم الرضاء عن الطلب، فيمكنك رد الطلب أو أي منتجات يتضمنها الطلب واسترداد ما دفعته من أجل تلك الأغراض بالكامل. عرض سياسة الرد الكاملة

تفاصيل امتثال المنت

يرجى الاطلاع على معلومات الامتثال الخاصة بهذا المنتج الموضحة أدناه.

يتم توفير المعلومات التالية من قبل بائع التجزئة المستقل التابع لجهة خارجية الذي يبيع هذا المنتج.

الجهة المصنعة:
توضح المعلومات التالية تفاصيل الاتصال الخاصة بالجهة المصنعة للمنتج ذي الصلة والذي يُباع على Fruugo.

  • Shenzhen Zhengxi Technology
  • Shenzhen Zhengxi Technology
  • Shangshui Garden, No. 146, Room 301
  • Shenzhen
  • CN
  • 518000
  • mv87yte@163.com
  • 13265968778

الشخص المسؤول في الاتحاد الأوروبي:
توضح المعلومات التالية معلومات الاتصال الخاصة بالشخص المسؤول في الاتحاد الأوروبي. الشخص المسؤول هو المُشغل الاقتصادي المُعيّن والكائن في الاتحاد الأوروبي والمسؤول عن التزامات الامتثال المتعلقة بالمنتج ذي الصلة الذي يُباع داخل الاتحاد الأوروبي.

  • eVatmaster Consulting GmbH
  • eVatmaster Consulting GmbH
  • Bettinastr. 30,60325 Frankfurt am Main,Germany
  • Frankfurt am Main
  • DE
  • 60325
  • kwqm8tq3@163.com
  • 496995179070