Spec: Item Type: Car Ramp Material: PP Capacity: Approx. 3000lb / 1360.8kg per side, 6000lb / 2721.6 per pair Height from the Ground: Approx. 17cm / 6.7in Quantity: 1 Pair Fitment: Suitable for Heavy Duty Car Lifts Home Garage or Shop How to Use: 1. Ensure that the product is placed on a hard and flat surface. 2. Make sure parking the vehicle securely on a ramp, turn off the engine, engage the handbrake, use wheel chocks to block the rear wheels, and ensure safety. 3. Regularly inspect the product, and if any damage or severe wear is found, do not use it and replace it promptly. packing list: 1 x Pair of Ramp Note: 1. Limit the total vehicle weight to within 3 tons, do not exceed. 2. The product is not suitable for vehicles with low chassis. 3. Please use on flat and hard road surfaces, in the correct position. 4. New drivers and drivers with poor skills should use with caution, pay attention to controlling the vehicle speed. 5. When using, please ask for assistance in guiding, do not rush over the ramp head. 6. Each wheel should be in the middle of the ramp, do not tilt. 7. Pull up the hand brake when stopping the vehicle on the ramp. 8. Place stopping devices for the rear wheels to prevent slipping.