<ul> <li>Separating the propeller from the outside to prevent the propeller from accidentally cutting into people and objects</li> <li>Avoiding foreign objects from hitting the propeller at the same time, enhances flight safety</li> <li>Using high-toughness material, resistant to impact and pressure, reducing accidental damage to the machine</li> <li>One set of two uses, full package and half package free switch, to meet the needs of multiple scenes</li> <li>Outdoor, more obstacles in the scene to use, indoor, close to low altitude flight, etc., for aerial photography flight to bring more security</li> </ul> <p><strong>Specification:</strong></p> <ul> <li>Material: ABS+PC</li> <li>Applicable models: for DJI Mini 2/Mavic Mini/Mini SE/Mini 2 SE</li> <li>Net weight: top cover: 0.89oz. (25.5g), lower protective cover: 0.89oz. (25.5g), top cover+lower protective cover: 1.8oz. (51.5g)</li> <li>Product size: 5.78*5.03*1.53in (14.7*12.8*3.9cm)</li> </ul> <p><strong><span>Note:</span></strong></p> <ul> <li><span>1. If you feel that the protective ring needs to be tighter, two screws can be installed on the back of the protective ring.</span></li> <li><span>2. The upper cover of the protective ring does not distinguish between front and back.</span></li> <li><span>3. After installing the protective cover, please turn on the "Payload Mode" in the safety settings of the flight software, the flight distance of the drone will be automatically limited to 30 meters in height and 50 meters in distance, please fly carefully.</span></li> </ul>