Tips:Only 125KZH low frequency HID is supported, and 13.56MHZ high frequency HID is not supported. Please verify your HID type before purchasing. Carrier frequency:13.56MHZ, 125KHZ RF distance:1-3cm IC card range:Class A and B cards in line with -14443 standard, e.g., IC card (Classics, DESFire), M1, S50, UID, CUID, FUID, UFUID, etc. ID card range:Proximity cards in line with ID standard, e.g., EM4305, 5200, 8800, T5577, -F08, HID, etc. :Windows 7 or 8 or 10 and the same time of Windows Server version Installation instructions: 1.Connect data cable 2.Connect the computer, and then indicator light displays red 3.Open the newly created "USB DISK" 4.Copy the operational program of corresponding language and paste it into computer 5.Double click to open the program, and confirm that device is connected If the computer fails to identify the replicator disk, please access ins..com to download manually IC card copy: 1.Place IC card in IC card read-write region, the indicator light displays green, and then click "Read" 2.After decoding, place IC card or device in IC card read-write region, the indicator light displays green. And then click "Write Type-A" 3.The IC card copy is done after card writing. ID card copy: 1.Place ID card in ID card read-write region, the indicator light displays green, and then click "Read EMID" 2.After card reading, place ID card or device in ID card read-write region. The indicator light displays green. And then click "Write EMID" 3.The ID card copy is done after card writing. Colour:Black Material:plastic Package Contents: 1 x RFID Replicator Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.