Precautions before installation1. Tip 1: Pre-Installation TestingDo not remove any protective film or labels during testing. Please be aware of static electricity problems.Always allow yourself to wear an ESD (electrostatic discharge) strap before attempting any repairs. This will prevent static electricity from damaging the electronic components inside your phone.Make sure you wear goggles and be careful not to cut your fingers with glass shards.2. Tip 2: Simulated TestingScreen replacements are very fragile products. We strongly recommend testing before installation. Please simulate the test, this means the phone is separated, (motherboard + LCD or screen) connect the audio cable and the new replacement, power on, test is complete. If the test is successful, please install. If it can not be displayed, please contact us at the first time. And please do not force it to be installed in the phone. Once the screen is installed, we will not be responsible for it.3. Tip 3: Don't bend the cable excessivelyPlease make sure that the LCD cable is not bent excessively. Bending it more than 90 degrees will cause the display to be black.About the product1 . For Xiaomi Redmi Note 10 Pro 4G / Redmi Note 10 Pro (India) / Redmi Note 10 Pro Max / Redmi Note 11 Pro (China) / Redmi Note 11 Pro 5G / Redmi Note 11 Pro+ 5G (India) / Redmi Note 11 Pro+ 5G M2101K6G M2101K6R M2101K6P M2101K6I Replacement of LCD + Touch Screen Digitizer assembly (TFT element).2. Replace old, replacement, non-working, damaged.3.Make your device look better than before.4.5.Every item is inspected and in good condition before shipment.6.. Professional installation is highly recommended. We are not responsible for the screen once it is installed.7 .. Note: Fingerprint recognition is not supported