SDR Receiver RTL2832U + R820T2 Chip 1PPM TCXO ADS-B 0.1MHz-1.7GHz Full Band Receiver The signal received by the antenna is converted into data by this receiver and sent to the computer, Android phone, and other devices through the USB interface. The software on the computer, Android phone, and other devices processes the demodulated signal, displays the frequency spectrum, and allows setting of bandwidth, signal recording, saving, playback, and other functions. Receives electromagnetic waves in the range of 100KHz-1.7GHz and supports AM, NFM, WFM, LSB, USB demodulation. Can be used to listen to short-wave single-sideband communications, radio, intercom calls, aviation bands, meteor monitoring, ADS-B decoding, signal analysis, and more. Feature: This receiver has a 1 ppm temperature compensation crystal oscillator (TCXO), making the frequency more stable. Minimal temperature drift (2 ppm initial deviation, 1 ppm temperature drift) improves internal chip heat dissipation, resulting in more stable operation. Uses the latest RTL2832U + R820T2 solution (R820T2 tuner offers slightly better sensitivity than R820T, lower background noise, and higher signal-to-noise ratio). Can work more stably at frequencies around 1.5 GHz. The Q channel on the RTL2832U enables direct sampling of frequencies from 100KHz to 24MHz, achieving 100KHz-1.7GHz full band coverage. Supports Windows XP/7/8/10, Mac, Linux, and Android systems. Specification: Type: with Antenna Product size: 71 x 43 x 19mm / 2.80 x 1.69 x 0.75 inch Product weight: 34g Color: silver Material: metal Package Contents: 1 x SDR Receiver 1 x Antenna Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item to appear slightly different from the real thing. Measurement allowed error is +/- 1-3cm.