A. Name: Electronic drain valve B. Model: 507292 C. Indicator lamp: LED indicating power on / off D. Voltage range: +/-10% E. Protection: IP65 F. Insulation: H G. Maximum working pressure: 1.6Mpa H. Maximum temperature: 90 Celsius I. Temperature: -40 Celsius to 60 Celsius J. The largest current consumption: 4mA K. Power supply voltage: 24-240V AC/DC 50/60Hz L. Discharge time (ON): 0.5--10 seconds M. Time interval (OFF): 0.5--45 minutes N. Widely used in separators, dryers, gas tank, drip legs and other compressed air system components O. Clean the compressed air system installation. P. Note the direction when installing the valve: outlet do not use the hose not against the impact of air. Q. Power supply voltage should be with the drain valve voltage: the must be connected to connector "1" when using DC. R. When leave the drain valve has connected to the cable, brownness is fiery L, blue is the N, yellow-green color is the safety ground wire GND. S. Be to tighten the long screw on the terminal box to prevent water from burning. T. Warning U. When installing the electronic drain valve, make: Compressed air has been emptied (is, under pressure). The power supply has been switched off. V. Colour: Gold + black W. Material: metal X. Size: 5 mm Y. In / out port size: 1/2inch Z. Package Contents: 1 x Electronic drain valve AA. Only the above package content, other are not included. AB. Note: Light and different displays may cause the color of the item a little different from the real thing. The measurement allowed error is +/- 1-3cm.