- Ready-to-use minimum system board for the Intel/Altera MAX II family CPLD: EPM240T100C5N. Ideal for entry-level CPLD/FPGA development and validation. - Simple power and programming access: JTAG and 5V power supply interfaces are brought out to header pins, so you only need to connect a 5V supply and a USB download connection for programming and testing. - Easy I/O expansion: All core I/O pins are routed to headers, allowing direct connection of external circuits such as LEDs, digital tubes, LCD modules, and serial communication devices. Key attributes - Function: Development and validation platform for the MAX II EPM240T100C5N CPLD; supports programming via USB download and JTAG access. - Compatibility: Designed for the MAX II family CPLD (EPM240T100C5N) and standard external peripherals (LEDs, displays, serial devices). - Power: Single 5V supply input for board operation; power and JTAG pins exposed for easy access. - Performance: Provides a complete minimum system around the EPM240T100C5N to accelerate prototyping without additional board setup. Practical applications 1. Prototyping I/O logic: Quickly connect LEDs, seven-segment displays (digital tubes), or LCD modules to test and demonstrate custom logic functions. 2. Serial device interfacing: Implement and debug UART/SPI/I2C interfaces between the CPLD and external sensors, modules, or microcontrollers. 3. Product validation and learning: Use the board for firmware development, hardware verification, or as an educational platform to learn MAX II CPLD design and programming. What you get - A minimum system board built around the MAX II family CPLD EPM240T100C5N with all I/O exposed. - JTAG and power headers routed to pins for convenient connection. - USB download support for programming and development. This board is designed to simplify entry into low-cost CPLD/FPGA development by providing accessible power, programming, and I/O expansion without extra wiring or complex setup.