Feature:1. High quality 1.5m/4.9ft soda black head black hose with adapter kit accessories.2. Exquisite workmanship and stable performance, practical soda accessories.3. Soft, not easy to fold, light weight, simple installation, the broken one can be replaced directly.4. The refill adapter can be used to replenish a small carbon dioxide tank from a larger carbon dioxide tank.5. Adopting high quality stainless steel material, not easy to rust or damage, durable.Specification:Item Type: Soda HoseMaterial: Stainless SteelColor: BlackLength: Approx.1.5m/4.9ftWeight: Approx.263g/9.3ozWorking Pressure (WP): 3000psiThread Interface: G5/8-14 // TR21-4How to Use:1. Screw the pin valve into the Soda machine2. Screw the nut onto the carbon dioxide cylinder and tighten it with a wrench3. Connect the quick connector4. Open the valve of the gas cylinder5. After completion, you can use the Soda machine.If you want to unscrew items from the machine:1. Close the atmospheric cylinder valve2. Press the button of the Soda machine to discharge the remaining carbon dioxide (if you do not disconnect the connector according to this guide, the o-ring of the quick connector will blow off)3. Disconnect the quick connector4. Unscrew the pin valve on the Soda machine and unscrew the nut on the CO2 cylinder.Package List:1 x Soda Hose1 x Instruction Manual2 x Spacer1 x GasketNote:1. This item only applies to gaseous carbon dioxide, not liquid carbon dioxide. It can't use siphon carbon dioxide tank!!2. Please do not disconnect the quick disconnect under pressure. The quick disconnect O‑ring will be blown off. It is recommended to discharge the remaining pressure on the Soda machine.