Condition: New Color: White Material: Nylon These cable ties are suitable for various applications, including drilling platforms, naval vessels, railways, and aviation. Pulling Force: 8.1 kg (for 100 × 2.5 mm size) Applications: These cable ties are designed for one-time use—once secured, they cannot be reopened. They are commonly used for bundling, securing, and sealing electrical cables. They are also suitable for any application requiring a permanent, non-detachable fastening solution. Instructions: 1. Place the tie around the objects to be secured. 2. Insert the free end into the locking head until the first locking tooth engages. 3. Adjust the position of the objects if needed (if adjustment is required, slightly pull the tie to loosen before re-tightening). 4. Pull the free end firmly to tighten. 5. Trim off excess material near the locking head. Temperature Specifications: - Operating Temperature Range: –40°C to +85°C - Installation Temperature Range: –10°C to +60°C - Maximum Short-Term Heat Resistance: +110°C - Melting Point: +256°C Package Contents: 50 × Nylon Cable Ties Note: Color appearance may vary slightly due to monitor settings. Slight measurement variations of ±1–3 cm may occur.