Epoxy Modeling Putty imagination is the limit 1.easy sculpting designed for detailing,seam/gap filling on models, easy to form with high plasticity and strong adhesion. 2.three color options choose either gray,white and skin colored,putty to suit your modeling demands. 3.simple to work with no special tool required,you can play it with bare hands,water proof,easy to sand with strong adhesion when cured. 4.great versatility compatible with most modeling materials,paste-like before curing for easy shaping. very low shrinkage when cured,drillable,sandble,and paintable. 5.imagination only imagintion is the limit of your creation. 6.demonstration. useing a car body correction for example. a car body that needs to be widened. max equal amount(1:1)of putty. best result is achieved using twisted patten to mixing.(prep.time approx 30 min.) keep mixing till an even,uni-color body of putty is obtained. start sculpting.(work time is 90 min.) standing can be started after 6 hours curing time. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.