OEM LCD Screen Digitizer Full Assembly with Frame Before Installation Notes Tip 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself using an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution to avoid injury from glass splinters. Tip 2: Simulate testing Screen replacement is a very fragile product. We strongly suggest testing before installation. Please simulate testing by disassembling the mobile phone, connecting the motherboard, LCD or screen, o cable, and the new replacement, then power on to test. If the test is successful, proceed with installation. If there is no display, contact the seller immediately. Do not force installation. The seller will not be responsible once the screen is installed. Tip 3: Do not over-bend the cable Ensure the LCD cable is not over-bent. Bending beyond 90 degrees may cause a black display. About the product 1. LCD display and touch screen digitizer assembly with frame 2. Replace your broken or non-functional screen with a new one 3. Restore your device to a like-new appearance 4. Designed to fit and function properly 5. Each item is inspected and in good condition before shipping 6. Professional installation is highly recommended. The seller will not be responsible after installation