RK3506G2 Support Linux USB DSI Screen Interface Development Board for Smart Home Automation Devices

Features: The pump is made of stainless steel, hard to rust, which is non-toxic, anti-corrosion and durable material. The fixed filter is not removable when in use. Dirty filter can be detached, easy to clean. It can transfer diesel, fuel water or kerosene and safely. It is forbidden to pump gasoline, alcohol, acid and alkali and other flammable, explosive and corrosive liquids. It is suitable for the harvester, large agricultural machinery, construction machinery, towing large wheels and other inconvenient transportation for refueling in the field, as well as the equipment and machinery that cannot reach the gas station. The pump adopts 12V / 24V DC motor, put 12V / 24V plug into car battery or cigarette lighter rather than plug into outlet. It is very easy to use and can reuse many times, economical and very practical.The pump is designed for diesel fuel and the bottom of the pump should be completely submerged in the liquid when in use. Features: Material: stainless steel Drive mode: electrodynamic Voltage: DC 12V, / 24V (optional) Current: 1.8A (12V), 0.8A (24V) Motor running current: 0.2A (12V), 0.1A (24V) Largest pump operating current: 1.5A (12V), 0.8A (24V) Power: 40W Flow: 12L / min Outside Diameter: 38mm / 1.5in Oil outlet diameter: 16mm / 0.6in Pump lift: 2m / 79in Motor running speed: 8500r / min Wire length: 3m / 118in Packaging: Carton Package size: 16 * 8.5 * 5.2cm / 6.3 * 3.3 * 2in Package weight: 327g / 11.5oz Application method: 1. Take a good stand-alone oil hose, then pump it completely into clean oil (or water). 2. Connect a 12V / 24V car battery or cigarette lighter instead. 3. The red click is to connect a positive pole, the black click is to connect a negative pole. 4. The pump after use, should put oil oil (or water) Notes: 1. Diesel pump powered by 12V / 24V DC motor, completely sealed device. 2. The engine is isolated from the hull. 3. When it works, first need to put a clean diesel pump in the middle of the diesel bucket, does not allow the empty load operation. 4. Pay attention to the load capacity of the bucket when the pump is running, do not exceed the load capacity line. 5. The pump is strictly prohibited to pump gasoline, alcohol and other flammable liquids. 6. The oil outlet pipe is self-supplied. 7. This product is mainly diesel, pumping, continuous work after 50 minutes, must cool the oil pump before use. 8. Do not change the anode and cathode of the battery clamp. 9. The pump must be completely submerged in liquid when in use. Package List: 1 * pump